T1 routing

alexm@agetech.net
Wed, 30 Oct 1996 19:08:14 -0500

I have a t1 to the internet for my dialin custome. Now I just expanded
to another county and I have installed a frame relay at the localtion
and another frame relay here at the main pop. Now I am going to route
another class c through my current connection here in the main pop anto
a t1 router out to the new location. What I would like to know is what
should I use to do this and how do you get people to share my new T1.
Let me draw a diagram.

|
|
|
t1 line
to internet
|
|
|
-------
cisco
2501
-------
|
|
|
|
------------
| main | ether |------------| t1 frame -------------
| pop |-------|what should | cloud | and here? | ------------
| | |I put here? |-----------| |---|remote pop |
------------ -------------- ------------- ------------
router #1 router #2
and csu/dsu and csu/dsu

This diagram shows tha mian pop and the new pop I am puting in another
county.
I was thinking about puting ascend p130 on both ends and it should rout
just fine from one pop to another but I dont know how many user profiles
it stores. I would like ohter customers to share the connections also so
I can sell frame relay t1 connections to the internet.
I assume you allow people to share your t1 by specifying user profiles
right?
Hows about another Cisco 2501, does that hold user profiles and alows
you to route different subnets
over one t1 connection. since I dont have access to my own damn router
because it is lease, I can see what the inside of the Cisco looks like.

Would someone mind if I call them and ask a few questions please!!!!!!