> __28.8_
> Internet --- Me -< >-- Client (Linux Box)
> --28.8-
>
>
> And for this to work the client box had to have the kernel compiled with
> EQL.
>
> Now... how do I do the above with two PM2-ERs Instead of a PM-2ER and a
> Linux box.? As there is only on W0/P1 port on each. Do I not use the W1
> port on the downstream on and instead use two of the Sx ports? Do I have
> to play with the routing tables to do this? Or again.. is this automagic?
Set up 2 modems on 2 ports to dial OUT and put them in the same dialing
group and assign them the same static ip address.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. 800-324-8594 jake@uh.edu
Houston, Texas http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
(Don't steal my squigglies)