Re: How to not have USERNAME status?

John G. Thompson (jgt10@livingston.com)
Wed, 20 Nov 1996 08:37:51 -0800 (PST)

On Wed, 20 Nov 1996, Bernard Klatt wrote:
>
> Occasionally I see a port with Status of USERNAME. I've always been
> able to clear it with a reset S<port> command, except tonight I see
>
> Port User Host/Inet/Dest Type Dir Status Start Idle
> S1 - - Log/Net In USERNAME 0 0
>
> and a reset S1 doesn't have any effect. A login attempt to that
> port shows it stuck in a loop asking for password.
>
> It's a PM2-10, ComOs V 3.3.2, with USR Courier 33.6 Externals on it.
> Ideas, suggestions, etc.. appreciated. TIA

Try the following to see if anything changes

Command> set all modem on

You might also check your maodem manual and init string to see if the CD
signal is set to follow the state on the phone line.

Hope that helps!!

JGT

--
John G. Thompson       Livingston Enterprises Inc.    Phone: (800) 458-9966
JOAT(MON)              4464 Willow Road                 Fax: (510) 426-8951
support@livingston.com Pleasanton, CA 94588      http://www.livingston.com