PM3 Question (fwd)

MegaZone (megazone@livingston.com)
Mon, 25 Nov 1996 08:17:45 -0800 (PST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Dale T.: "Re: "Can't negotiate compatible protocol" errors..."
Previous message: MegaZone: "mult-link-^Pppp WIT^H^H^H^H^Hwith NT4.0 (fwd)"
Next in thread: Ed Longstrom: "Re: PM3 Question (fwd)"

Once upon a time Technical Support shaped the electrons to say...
> We use the European standard here, what signalling protocol does the E1
>interface require? (R2, C7 etc.) Also are the Euro standard PM3's available

ISDN Switch Compatibility

5ESS
DMS-100
NET5
1TR6
NTT
KDD
NI2

ISDN Switch Encoding

AMI and B8ZS (T1)
AMI and HDB3 (E1)

ISDN Switch Framing

ESF and D4 (T1)
CRC4, FAS (E1)

Dial-up Connections

64/56Kbps synchronous
64/56Kbps asynchronous with V.120 rate adaption
Analog modem (with AT command emulation)

Channelized T1/E1

Leased line and Frame Relay

That's from the online datasheet.

-MZ

--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588

Next message: Dale T.: "Re: "Can't negotiate compatible protocol" errors..."
Previous message: MegaZone: "mult-link-^Pppp WIT^H^H^H^H^Hwith NT4.0 (fwd)"
Next in thread: Ed Longstrom: "Re: PM3 Question (fwd)"