TCP/ IP route just fine, but I'm having "weird' problems with IPX.
My setup looks like this:
serverA -------OR-U ****ISDN**** PM2-ERw/5BRI -----server B
Someone on the side of Server B can login via IPX to serverA. Noone on
the side of ServerA can login to ServerB, it doesn't even show up. It is
like IPX is routing only one way.
Second. The people on the side of Server B cannot use SPX to the
Server A side. No rconsole, print server connections etc.
Here is a sample of ipxroutes on the OR-U:
>show ipxroutes
Network Gateway Flag Met Ticks Interface
-------- --------------------- ---- --- ----- ---------
000000A2 00000005:00C0050123C7 ND 2 36 ptp3
00000004 00000005:00805FCCC96C ND 2 2 ether0
00000003 00000005:00805FCCC96C ND 2 2 ether0
00000002 00000005:00805FCCC96C ND 2 2 ether0
00000001 00000005:00805FCCC96C ND 2 2 ether0
00000005 00000005:00C005030C36 NL 1 18 ptp3
02427575 00000005:00C0050123C7 ND 2 36 ptp3
04573378 00000005:00C0050123C7 ND 3 20 ptp3
04573377 00000005:00C0050123C7 ND 2 19 ptp3
954BF5E3 00000005:00805FCCC96C ND 2 2 ether0
5268CA7F 00000005:00C0050123C7 ND 3 20 ptp3
763B89D8 00000005:00C0050123C7 ND 4 38 ptp3
Everything looks fine to me.
I have called tech support but I've been having a hard time getting
through. I'm not slamming them, I know they're busy. This problem has
existed for 2 months, it has never worked right.
If you have any hints, I would appreciate the feedback.
Thanks,
Tom Bilan