>
> I was wondering where the MIB's for SNMP are located on the web page
> and/or ftp site. Specifically I am looking for the enterprise and/or
> specific MIB's for the IRX-114, PM-2e, and PM-3 products. If you
> do not have this information online, consider it a request. I would also
> like information on what standard MIB's are supported by livingston
> products (MIBv1, MIBv2, RMON, RFC's etc)
Just MIB2. Now.
> Your manual does cover how to active the SNMP module and set the
> community strings/permissions. As to what SNMP information is available
> as read-only or read-write, there is a great void. I would prefer
> standard MIBs and ASN.1 format, but even if it was text documentation of
> the nodes, format, descriptions etc, we could construct our own MIB files.
A great void, huh? Well, er, um yes. SNMP support is pretty high on my
personal wishlist, and it seems to be climbing. We're in the process of
trying to hire a good (well, awesome) SNMP agent engineer (hint, hint).
Stay tuned ...
andy
++++
In Redmond, no one can hear you scream ...
My opinions, of course, are my own, unless they were given to me by my
employer.
Andrew Doolittle - Sr. Engineer Livingston Enterprises
email: andy@livingston.com vmail: (800)458-9966
smail: 4464 Willow Road, Pleasanton, CA 94566