Having a small problem here. There is a lack of documentation for what
I'm trying to do on the FAQ and in the install. Basically I'm trying to
get our new PM3 with two T-1's and 3 '8 modem' cards to work. I've
plugged our T-1 into the switch which has D4/AMI configured and I've setup
the livingston to look like this:
---------------------- line0 - T1 1.536 Mbps -----------------------
Status: DOWN Framing: D4 Encoding: AMI PCM: u-law
Receive Level: less than -22.5dB
Alarms Violations
----------------------------- -----------------------------
Blue 0 Bipolar 6625
Yellow 0 CRC Errors 0
*Receive Carrier Loss 1 Multiframe Sync 1203379
*Loss of Sync 1
But no matter how I do the wires or configure it, I get nothing. Always a
RED light and I never see status up. I /thought/ I read someone in the
newsgroup that the PM3 doesn't support T1 PRI service for a few more
months. All I know is that I paid $11K for 24 digital modems and PM3 and
I damn well want this to work out of the box. I'm not interested in ISDN,
I only want to dial the head of my huntgroup that's been given to me and
have all the calls routed via the T-1 to the digital modems. Sigh.
Help,
Justin