Re: PM3 w/PRI T-1 configuration? (fwd)

Alex Rubenstein (alex@nac.net)
Mon, 9 Dec 1996 10:10:31 -0500 (EST)

It was fairly easy to understand.

Either you don't read very well, or you don't know what the hell you are
doing.

On Mon, 9 Dec 1996, Stephen Fisher wrote:

>
> The digital modems can be used for a modem call arriving over a PRI line.
>
> On Mon, 9 Dec 1996, Justin B. Harvey wrote:
>
> >
> > So why did they sell me digital modems if the ComOS isn't ready yet?
> > Lemme get this straight, I can make the modems I bought work, but I'd
> > have to buy an ISDN PRI line, is that correct? I understand what you're
> > saying Christopher, but Livingston was not very clear in what they were
> > offering and what they're supporting in the future.
> >
> > Justin
> >
> >
> > On Mon, 9 Dec 1996, Christopher E. Brown wrote:
> >
> > > On Mon, 9 Dec 1996, Justin B. Harvey wrote:
> > >
> > > > I shouldn't have to ask your company if they're advertising the feature.
> > > > It's all over your web page and in your FAQs. Why do they ship the
> > > > digital modems? I understand you might have been screaming endlessly on
> > > > this list and at tradeshows, BUT I DON'T GO TO TRADE SHOWS OR READ THIS
> > > > EMAIL LIST UNTIL NOW!!!!! :) To quote the webpage:
> > > >
> > > > << http://www.livingston.com/Marketing/Products/pm3.shtml >>
> > > > Through the use of a dynamic WAN switching architecture, the PortMaster 3
> > > > can automatically switch between ISDN and analog modem calls. A single
> > > > phone line can access all dial-up WAN services across a single or multiple
> > > > incoming PRI channels. The PortMaster 3 combines these features with WAN
> > > > support for Frame Relay and synchronous leased lines, including
> > > > channelized T1 or E1 signalling, to offer the most complete remote access
> > > > solution for Internet Service Providers (ISPs) and enterprise networks.
> > >
> > > Hate to burt you bubble Justin. But it does not say it supports
> > > Channelized T1 for dialin.
> > >
> > > It states it will incoming calls across a sungle or multiple *PRI* lines.
> > > The only mention of channelized T1 saying it is supported in leased lines...
> > >
> > > If you are not a tech type, who understands *ALL* of the
> > > functions listed ordering without talking to tech support is a very bad idea.
> > > Not trying to ragg on you here, but for future ref...
> > >
> > > I myself am just waiting on the Channelized T1 *dialin* support
> > > (No PRI's here) to get a couple.
> > >
> > > ----------------------------------------------------------------------------
> > > Christopher E. Brown WL7CLA <cbrown@matnet.com>
> > >
> > > We are Pentuim of Borg. Division is futile. You will be approximated.
> > >
> > > ----------------------------------------------------------------------------
> > >
> > >
> >
>
>