I'm trying to get radius 2.0 running on Linux. The binary distribution
would not run at all, so I've compiled the source and it at least
tries to run.
It exits with signal 100 after the first accounting ticket comes in.
I'm only using this box for accounting, NOT authorization.
/etc/radiusd -x shows:
database [/etc] {rmorris}# /etc/radiusd -x
Mon Dec 9 14:27:35 1996: [3982] /etc/radiusd: RADIUS version 2.0 96/10/30 NDBM NOSHADOW PASSCHANGE flat_users
Mon Dec 9 14:27:35 1996: [3982] using udp port 1645 for RADIUS
Mon Dec 9 14:27:35 1996: [3982] using udp port 1646 for RADIUS accounting
Mon Dec 9 14:27:35 1996: [3982] updated client cache with 4 clients
Mon Dec 9 14:27:35 1996: [3983] radrecv: Request from host 199.60.118.200 code=4, id=30, length=120
Mon Dec 9 14:27:35 1996: [3983] Acct-Session-Id = "1301132B"
Mon Dec 9 14:27:35 1996: [3983] User-Name = "blairh.ppp"
Mon Dec 9 14:27:35 1996: [3983] NAS-IP-Address = 199.60.118.200
Mon Dec 9 14:27:35 1996: [3983] NAS-Port = 24
Mon Dec 9 14:27:35 1996: [3983] NAS-Port-Type = Async
Mon Dec 9 14:27:35 1996: [3983] Acct-Status-Type = Stop
Mon Dec 9 14:27:35 1996: [3983] Acct-Session-Time = 178
Mon Dec 9 14:27:35 1996: [3983] Acct-Authentic = RADIUS
Mon Dec 9 14:27:35 1996: [3983] Acct-Input-Octets = 26283
Mon Dec 9 14:27:35 1996: [3983] Acct-Output-Octets = 130118
Mon Dec 9 14:27:35 1996: [3983] Acct-Terminate-Cause = User-Request
Mon Dec 9 14:27:35 1996: [3983] Service-Type = Framed-User
Mon Dec 9 14:27:35 1996: [3983] Framed-Protocol = PPP
Mon Dec 9 14:27:35 1996: [3983] Framed-IP-Address = 199.60.118.114
Mon Dec 9 14:27:35 1996: [3983] Acct-Delay-Time = 0
Mon Dec 9 14:27:35 1996: [3982] exit on signal 100
This happens instantly, the first time a ticket comes in.
Does anyone have any ideas why this is happening??
Rick Morris
Pacific Interconnect Support.