Anyone with some experience routing IPX through PortMaster products
care to take a look at the captures below from a pair of OR-HS routers
and see if you recognize a configuration problem?
I'm having trouble getting IPX to work properly, although IP routes
fine.
The hub office is "silverado-router" which contains IPX network 12345
(plus another network which isn't of interest). The frame relay net
is set for C0000FF. The remote office "ksqr" contains nothing but a
hub and single workstation. OS is Netware 3.12, frame type 802.3, and
the remote network # 1420. See below for details.
>From the "show IPXroutes" it seems that we can see routes from one
side, but not the other. Hmm.
silverado-router> show ether0
Ethernet Status: IP - Enabled IPX - Enabled
Interface Addr: silverado-router.digicity.net (207.212.97.17)
Netmask: 255.255.255.240
Broadcast Address: 207.212.97.31
IPX Network: 00012345
IPX Frame Type: ETHERNET_802.3
Ethernet Address: 00:c0:05:03:08:15
Routing: Broadcast, Listen (On)
Input Filter:
Output Filter:
silverado-router> show w1
----------------------- Current Status - Port W1 ---------------------------
Status: ESTABLISHED
Input: 369912 Abort Errors: 0
Output: 463492 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 1536K Ext Clock
Modem Control: on on
Local Address: gw-digicity.silverado-r gw-digicity.silverado-radio.com
Netmask: 255.255.255.240 255.255.255.240
IPX Network: 0C0000FF
Interface: frmW1 (FRM,Routing) (FRM,Routing)
Mtu: 1500 0
LMI Poll Int: 10 (seconds)
DLCI List: 17:5.3.7.223
Dial Group: 0
silverado-router> show ipxroutes
Network Gateway Flag Met Ticks Interface
-------- --------------------- ---- --- ----- ---------
00012345 00012345:00C005030815 NL 1 1 ether0
0C0000FF 0C0000FF:00C005030815 NL 1 1 frmW1
2EC18DB4 00012345:00403321B7CA ND 2 2 ether0
silverado-router>
------------------------------------------------------------------
ComOS - Livingston PortMaster
ksqr> show ether0
Ethernet Status: IP - Enabled IPX - Enabled
Interface Addr: 207.212.97.65
Netmask: 255.255.255.240
Broadcast Address: 207.212.97.79
IPX Network: 0C001420
IPX Frame Type: ETHERNET_802.3
Ethernet Address: 00:c0:05:03:07:df
Routing: Broadcast, Listen (On)
Input Filter:
Output Filter:
ksqr> show w1
----------------------- Current Status - Port W1 ---------------------------
Status: ESTABLISHED
Input: 901289 Abort Errors: 0
Output: 615126 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 1536K Ext Clock
Modem Control: on on
Local Address: 207.212.97.4 207.212.97.4
Netmask: 255.255.255.240 255.255.255.240
IPX Network: 0C0000FF
Interface: frmW1 (FRM,Routing) (FRM,Routing)
Mtu: 1500 0
LMI Poll Int: 10 (seconds)
DLCI List: 21:5.3.8.21
Dial Group: 0
ksqr> show ipxroutes
Network Gateway Flag Met Ticks Interface
-------- --------------------- ---- --- ----- ---------
00012345 0C0000FF:00C005030815 ND 2 2 frmW1
0C0000FF 0C0000FF:00C0050307DF NL 1 1 frmW1
0C001420 0C001420:00C0050307DF NL 1 1 ether0
2EC18DB4 0C0000FF:00C005030815 ND 3 3 frmW1
ksqr> quit
Goodbye...
Connection Closed