I have two OR and I want to allow a PC that is on office 1 to connect to de
Server that is on the other site (office2). The communication is On-demand
by ISDN, and the protocol is ppp/ip.
My system is as follow:
OFFICE 1
-----------------------------------------------------------------------
| |
OR 192.168.200.1 PC 192.168.200.7
| 255.255.255.0 255.255.255.0
| Gateway 192.168.1.1 gateway 192.168.200.1
| PPP/IP
| quiet
| on-demand
|
|
|
|
OR Server CISCO
| |
|
------------------------------------------------------------------------------
192.168.1.1 192.168.1.2 194.224.0.1
255.255.255.0 255.255.255.0 255.255.255.0
Gateway 194.224.0.1
PPP/IP quiet
As you can see I have copied the example 18-xx page of the manual.
As well I have configure the Table location and Usertable as is descrived on
the manual.
Questions:
1- Is the example of 18-xx page right?
2- Why on-demand does not work?
I mean that when PC (192.168.200.7) make a FTP or telnet to 192.168.1.2
(Server OFFICE2) the OFFICE1 OR does not call. I need to do it handly, and
the sytem is configurated like on-demand.
3- Some times making handly the DIAL OFFICE2 the OFFICE1 OR does not call,
the channels are connecting status. Some times I need to RESET Sx and then
DIAL OFFICE2 once again to connect. BUT all handly. I think the system is
not very static, some times works and others does not. Why?
4- When I have connected to the OFFICE2 handly and I want to connect to the
Server making a Telnet or FTP (it supports both) from PC (192.168.200.7) it
does not work .Why? I am connected !!!
I do not know what it is happening. May be the example it is not right....
Could anyone help me? I will be very happy.
Thank you for all your time and help.
Regards,
Fernando Martin
Interlinea2000
www.i2000.es
34-43619101