1- I have an OR-U (192.168.1.1=3D Ethernet IP) connected to a Network that=
has
a CISCO router (194.224.0.1) That is the Internet access router).
The OR-U (192.168.1.1) has defined like WATEWAY the 194.224.0.1 (CISCO).
Also We have a web , FTP, application server on 194.224.0.x .
QUESTION: When I make a telnet to the OR-U router (192.168.1.1) I can not
ping to the 194.224.0.1 nor 194.224.0.x. (Telnet.....)The OR says NO answer.
Why? 194.224.0.1 is the default wateway of the OR-U!!
2-We have two OR-U routers on two different network. 192.168.1.1 and
192.168.200.1 <---OR=B4s IP.
I want to allow any PC from OFFICE 1 (192.168.1.x) connect to A server that
is on the other site (192.168.200.1). We have programmed the Routers.
Defining on the User table and location table always a user o location with
a specified IP that is always the remote site. For example if we are on the
192.168.1.1 OR we program the user and location with a specified
IP=3D192.168.200.1 (The orther OR) That seems to be right.
On the other hand when a person calls to the OR using a ISDN card the OR
test his name and password agains its User table and gives him a IP that is
on the same network. Why?
For example when anyone wants to connect to internet he must have a Internet
IP, so why in the first case we enter the remote IP and now an IP that is on
the same network that is the OR.
Could you explain me it?
3- Has anyone experience in Netware IP?. Netware IP is a soft that allow
putting the novell server with and IP and allow access it with tcp/IP.
I had many problems with IPX and now I want to test the same but with IP.
4- Had anyone problems with two OR accessing ON-demand?
Thank you for all your time and help.
Regads,
=20
Fernando Martin=20
Interlinea2000
www.i2000.es
34-43619101