I have the following system:
As you see the programmation is looks like the 18 page of the book.
-----------------------------------------------------------------------
| |
OR 192.168.200.1 PC 192.168.200.7
| 255.255.255.0 255.255.255.0
| PPP/IP gateway
192.168.200.1
| quiet
| on-demand
|
|
|
|
OR Server
| |
--------------------------------------------------------
192.168.1.1 192.168.1.2
255.255.255.0 255.255.255.0
PPP/IP quiet
The system works!
The only problem is that when I make a TELNETto 192.168.1.1 (OFFICE2 router
) from 192.168.200.7 (This is a PC that has an IP of the 192.168.200.0
Network and has like gateway 192.168.1.1) The OFFICE 1 router calls and
makes a connection (Established ).
But I can connet to it ( OFFICE 2 router.) I can see the remote router,
however the two routers are connected together.
If I make a telnet to 192.168.200.1 and then make a telnet to 192.168.1.1.
I can ( This way I can connect but not directly).
What could be the problem? If a make a PING from 192.168.200.7 PC the PC
says NO ANSWER,.
I do not understant this. They are connected but I can see it. May be a
Route problem? But where?
Thak you for all you help and time.
Regards,
Fernando Martin
Interlinea2000
www.i2000.es
34-43619101