Did you have any RADIUS accounting paragraphs which showed 33600 as the
data rate (see same thread from about 07:30 AM CST this morning)? If so,
what percent of your analog callers get 33.6K?
Thanks,
Larry Vaden
Internet Texoma, Inc.
---30---
At 04:15 PM 12/16/96 -0800, Tom English wrote:
>MegaZone wrote:
>>Once upon a time Larry Vaden shaped the electrons to say...
>>>Are you providing the data rate to the RADIUS accounting process?
>>
>>No. We support the standard RADIUS protocol as defined in the IETF draft.
>>There is no dictionary item to report connect speeds. But this is an
>>interesting idea. I'll mention it to the head of the RADIUS WG (who
>>conveniently works down the hall... ;-) ).
>>
>>You might consider taking it to the WG as a proposal. The IETF RADIUS
>>mailing list is ietf-radius@livingston.com. You can join by emailing
>>'majordomo@livingston.com' with 'subscribe ietf-radius' in the body.
>>
>>>Any other display?
>>
>>I believe a 'show' on an active port will display the connect speed.
>>But I don't believe it is actively logged. I'll see if it is feasible
>>to add to syslog.
>>
>>BTW: We've supported 2400bps connections since late beta, just to prevent
>>confusion from Todd's comments.
>>
>>-MZ
>
>under the ascend radius, this shows up as:
>
>Mon Dec 16 10:39:51 1996
> User-Name = "bozo"
> NAS-Identifier = 10.10.10.12
> NAS-Port = 20101
> Acct-Status-Type = Stop
> Acct-Delay-Time = 0
> Acct-Session-Id = "219081564"
> Acct-Authentic = Local
> Acct-Session-Time = 488837
> Acct-Input-Octets = 9582343
> Acct-Output-Octets = 16155222
> Acct-Input-Packets = 65599
> Acct-Output-Packets = 37919
> Ascend-Disconnect-Cause = 11
> Ascend-Connect-Progress = 60
> Ascend-Data-Rate = 26400 <======== connected data rate
> Ascend-PreSession-Time = 30
> Ascend-Pre-Input-Octets = 12
> Ascend-Pre-Output-Octets = 69
> Ascend-Pre-Input-Packets = 0
> Ascend-Pre-Output-Packets = 0
> Ascend-First-Dest = 204.247.139.172
> Client-Port-DNIS = "*******"
> Framed-Protocol = PPP
> Framed-Address = 10.10.10.10
>
>
>tom