Re: PM 2E Framing errors...

Andy Thaggard (andy@tilc.com)
Fri, 27 Dec 1996 01:58:08 -0600 (CST)

>
> > Framing errors are almost always the result of a mismatch between the
> > port speed of the Portmaster and that of the modem.
>
> Yup. They sometimes indicate bad phone lines, but you have to check the
> baud rate first.

Ok...either I have a bad port or phone line. I have never heard someone
say that the phone line could be bad....are you speaking of the actual
telco line or the physical cabling involved.

S1 shows 14000 framing errors. We rotated the modem out, and I will do
some testing on that particular modem but I do not believe it to be
faulty.

Is there any test I can do on S1?

--------------------------------------------------------------
Andy Thaggard
Systems Administrator
The Internet Learning Company
andy@tilc.com
--------------------------------------------------------------