Simon,
thank you for this information, it worked! Now the Cisco 751 connects
to PM3 fine. But then we discovered another problem... Here are the
netmask and route tables. As you can see the netmask for example network
193.209.72.176 is 255.255.255.240. But when I add a route for that
network, it shows 32bit netmask, and won´t correctly, of course...???
Any ideas?
PM3_1> sh tab
netmask
Active
Netmasks:
Network Netmask
Type
---------------- ----------------
-------
193.209.72.176 255.255.255.240
Static
Stored
Netmasks:
Network
Netmask
----------------
----------------
193.209.72.176
255.255.255.240
PM3_1>
PM3_1>
PM3_1> sh
route
Destination Mask Gateway Source Flag Met
Interface
----------------- ---- -------------------- ------- ---- ---
---------
0.0.0.0 0 194.251.131.1 local NS 1
ether0
194.251.131.68 32 194.251.131.68 local HL 1
ptp0
194.251.131.110 32 194.251.131.110 local HL 1
ptp1
194.251.131.0 24 194.251.131.20 local NL 1
ether0
193.209.72.176 32 193.209.72.177 local HS 1
Unknown
PM3_1>
regards Jukka