> I recently bought a used PM-2E and I'm now trying to configure it.
>
> How do you unset parameters. For example a "show global" displays the
> "Reported Address". I don't want a reported address. Can I reset
> this value to nothing or its default value? If so, how?
The easiest way to start out to with a used Portmaster is to type the
following command at the prompt: set register 0xffff 0x0102
This command completely erases the configuration info for the Portmaster
and sets everything back to default values. The next time you do a !root
login, there will be no password.
This eliminates the possibility that the previous owner set something that
isn't obvious.
Brian