Re: Putting livingstons on seperate class-c's
Jeffrey J. Mountin (sysop@mixcom.com)
Fri, 02 May 1997 21:01:39 -0500
At 09:20 AM 5/2/97 -0500, Jason Hatch wrote:
>We're running out of address space here and I wanted to put my portmasters
>on their own class-c. Is this as simple as setting the assigned
>address-pool the an IP within that class-c or does something else have to
>be done? I can still leave the livingston's main IP on the same network
>its on now, right?
>
>As it stands, my router accepts RIP packets from the portmaster, so
>whenever someone dials in, it adds a route to that IP making the
>portmaster the gateway.
Keep the ether0's on the same class C as the rest of the network and either
static route each subnet to the respective PM or use OSPF.
(the other possibility will use the first PM as a gateway for the others,
but I don't like that method, as it adds a hop)
Are these PM2's or PM3's?
Reminds me, need to finish up a simple OSPF setup page.
-------------------------------------------
Jeff Mountin - System/Network Administrator
jeff@mixcom.net
MIX Communications
Serving the Internet since 1990