Anyone else on the list use RadiusNT and can help out?
-- Aloha,Sherwood
---------- Forwarded message ---------- Date: Sat, 3 May 1997 00:40:40 -0400 From: "James T. Robson" <robie@thewebplace.com> To: Sherwood Pekelo <spekelo@iav.com> Subject: Re: Async port parameters
Thanks Sherwood, That got me going in the right direction. I'm using a PM-3 with ComOS 3.5.1b13. Got it straight from the Livingston Support desk. Also using RadiusNT .60.
Radius will now boot ok and load the users from the users file, but they cannot logon. They get a message about not being able to negotiate an appropriate protocol.
If I try to do ODBC I get the following. This is when I set RadAdmin to read an Access 7.0 file and point it to the radius7.mdb file. Have you seen this before? Dale??
Thanks, Robie ---------------------------------------------------------------------------- -----------------------------------------------
C:\radius>radius -x15 -A -b
RadiusNT 1.16.60 2/7/97 Copyright (c) 1996 IEA Software, Inc. All Rights Reserved, Worldwide
Some portions Copyright (c) 1992 Livingston Enterprises, Inc. and Copyright (c) 1995 Ascend Communications, Inc.
0) EncryptPasswords: 1 1) IgnoreCase: 0 2) ReqAcctAuth: 1 3) Mode: 2 4) Options: 95 5) Debug: 15 6) ODBCDatasource: MS Access 7.0 Database 7) DataDirectory: ../radius 8) AcctDirectory: ..radius/acct 9) UsersFile: radius7.mdb 10) Username: 11) Password: 12) AuthPort: 1645 13) AcctPort: 1646
Param: Debug Level: 15 Param: Require Authentication for Accounting packets Param: ODBC and Normal Operations enabled Initializing Winsock... ODBC Datasource: 'MS Access 7.0 Database'... Allocating ODBC Henv... Allocating ODBC Connect... Making ODBC Connection... ODBC: SQLConnect Error: [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectO ption failedAllocating Statement... ODBC: SQLAllocStmt Error C:\radius>
---------- > From: Sherwood Pekelo <spekelo@iav.com> > To: James T. Robson <robie@thewebplace.com> > Cc: portmaster-users <portmaster-users@livingston.com> > Subject: Re: Async port parameters > Date: Friday, May 02, 1997 9:18 PM > > On Fri, 2 May 1997, James T. Robson wrote: > > > Hi all, > > > > Will someone be kind enough to help me with async port configs? I > need a > > sample set to accommodate a dial-in internet user using PPP. Thanks, > > Robie > > Hmm, What ComOS, What radius.... 8) > > Our RADIUS user default for PPP is: > > DEFAULT Password = "UNIX" > User-Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Netmask = 255.255.255.0, > Framed-Routing = Broadcast-Listen, > Framed-MTU = 1500, > Framed-Compression = Van-Jacobsen-TCP-IP > > > Note: i'm using legacy "UNIX" which should be "SYSTEM" > > Hope this helps! > -- > Aloha, > > Sherwood >