pm2e isdn lockups (fwd)

MegaZone (megazone@livingston.com)
Fri, 9 May 1997 17:27:54 -0700 (PDT)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: MegaZone: "Connect speeds on PM3 (fwd)"
Previous message: MegaZone: "ppp_sync fails (fwd)"
Next in thread: Suresh Rajagopalan: "Re: pm2e isdn lockups (fwd)"

Once upon a time Shane Dixon shaped the electrons to say...
>One of my pm2e's with a five port bri card has recently begun freezing
>up, I cannot reset any ISDN port and a reset all will only reset the 20
>analog ports. If the isdn connection is broken from the other end
>(portmaster office routers) teh pm2e will not show a disconnect. I have
>to reboot to allow normal operation, then things are ok for about 1

1. I'd look into 3.5.1b17
2. What switch type - is it 5ESS PTP per chance?
3. How's your RAM usage?

-MZ

--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588

Next message: MegaZone: "Connect speeds on PM3 (fwd)"
Previous message: MegaZone: "ppp_sync fails (fwd)"
Next in thread: Suresh Rajagopalan: "Re: pm2e isdn lockups (fwd)"