> Is it possible to attach a modem to the PM3 (and OR-ST) Async port and
> use it to PPP connections? If so, where can I set the init string for
Yes.
> the modem?
First, setup a new modem type:
Syntax: add modem [Short_Name] [Long_Name] [Speed] [Send/Expect_String]
Example: add modem generic "Generic Modem" 115200 "ATZ\r^OK"
The example will add a modem called generic with a description of Generic
Modem at the port speed of 115100 and whenever you reboot the portmaster
or reset the async. port the modem is on it will send the init string
ATZ\r and then wait for OK back from the modem.
Then just set the port for that modem type:
set c0 modem generic
Hope this helps.
- Steve
- Systems Manager
- Community Internet Access, Inc.
- Gallup and Grants, New Mexico