On Sat, 10 May 1997, Andy Thaggard wrote:
> I know I asked this before..need a good
> modem string for USR 33.6 externals. I am using the default
> one for v.34 in my PM2E-30, and the modems just are not
> resetting correctly.
> Here is what I do:
> add modem usr-v34 "U.S. Robotics V.34" "AT&F1S0=1\r^OK"
> set <port> modem usr-v34
> reset <port>
I made a mistake in the above... Substitute the following for the "add
modem" line"
add modem usr-v34 "U.S. Robotics V.34" 115200 "AT&F1S0=1\r^OK"
I forgot to include the port rate :)
Chad Scott | chad@txdirect.net
Systems Administrator | Voice 210-308-9800 x206
Internet Direct, Incorporated | FAX 210-308-9240
---------------------------------------------------------
Finger chad@txdirect.net for PGP Public Key