That is correct.
>want to use the PM3 to route from an Ethernet to a T1 (and vice-versa of
>course). This T1 will be plugged into the PM3, and the Ethernet will
>connect to another router (with another T1 on it).
This should work no problem. The PM-3 is a full router as well as an
access server. You can take full T1, frac T1, or channelized T1 WAN links
and run PPP or frame relay over them.
-MZ
-- Livingston Enterprises - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 4464 Willow Road, Pleasanton, CA 94588