We have a frame line into one T1 port a PRI into the other for dialup ISDN
and analog and we are routing to the ethernet port. What a great machine!!
Tom
>Once upon a time Jawaid Bazyar shaped the electrons to say...
>>I understand the PM3s T1 ports can be used for PPP and Frame Relay. I
>
>That is correct.
>
>>want to use the PM3 to route from an Ethernet to a T1 (and vice-versa of
>>course). This T1 will be plugged into the PM3, and the Ethernet will
>>connect to another router (with another T1 on it).
>
>This should work no problem. The PM-3 is a full router as well as an
>access server. You can take full T1, frac T1, or channelized T1 WAN links
>and run PPP or frame relay over them.
>
>-MZ
>--
>Livingston Enterprises - Chair, Department of Interstitial Affairs
>Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
>For support requests: support@livingston.com <http://www.livingston.com/>
>Snail mail: 4464 Willow Road, Pleasanton, CA 94588
>
>
>
----------------------------------------------
Tom Mastre, Director of Operations, Universal Internet
200 Clocktower Place - Suite B205
Carmel, CA 93923
vx 408.622.5000 - fx 408.622.5010
http://www.universal-net.com
----------------------------------------------