> The symptom I see is that a call to the first DN on the BRI will come
> in to B1 (S20, in this case) and work just beautifully. No problems
> here.
>
> The problem is when the SECOND person calls that DN. It will come
> into the PM2 and the customer at the other end will get a 'call rejected'
> indication.
My understanding is that this will NOT work with current PM2 software
(ie. have the PM2 take two different calls for the two Bs on the same
(first) number). The only way for this procedure to work is to have a
hunt group for the two Bs. If anyone can do this without a hunt,
PLEASE LET ME KNOW.
Further, ESPECIALLY FOR A HUNT, you will need to have your telco set
the switch parameters CSV and CSD equal to 1 for each B (from the
normal default around here of 2).
That should clear it up, I think.
Anyone know if this behavior is due to ISDN itself or is it due to the
programming in the PM? I seem to remember having no problem doing this
exact thing with a P50 and P400 - can anyone substantiate my poor memory!?
I take the digest, so sorry if this has already been covered today....
Derric
-- Derric Scott Scott Network Services, Inc. P. O. Box 361353 derric@scott.net (205)987-5889 Birmingham, AL 35236