> On Tue, 20 May 1997, Gene Imes wrote:
>
> > Port Type: Device Device (Security)
> > Device Service: Telnet@6000 Telnet@6000
> > Baud Rates: 9600 9600,9600,9600
> > Databits: 8 8
> > Stopbits: 1 1
> > Parity: strip strip
> > Flow Control: RTS/CTS RTS/CTS
> > Modem Control: on on
>
> Try turning OFF modem control. Not sure if this helps, but try it. And
> what cable config are you using? 8 to 20 or 6 to 20 ?
>
The cable is a rj45 to db25. It works. I am not sure about what is what on
the rj45 side. This setup worked when I just hooked them up to the ports
but when I tried to make them so I could telnet to them, that is when it
quit working.
The modem control off allowed me to connect to the port but can't get the
device to respond. Looks like a tinkering with it job.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gene Imes http://www.ozob.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~