> On Tue, 20 May 1997, Jake Messinger wrote:
>
> > On Tue, 20 May 1997, Gene Imes wrote:
> >
> > > Port Type: Device Device (Security)
> > > Device Service: Telnet@6000 Telnet@6000
> > > Baud Rates: 9600 9600,9600,9600
> > > Databits: 8 8
> > > Stopbits: 1 1
> > > Parity: strip strip
> > > Flow Control: RTS/CTS RTS/CTS
> > > Modem Control: on on
> >
> > Try turning OFF modem control. Not sure if this helps, but try it. And
> > what cable config are you using? 8 to 20 or 6 to 20 ?
> >
>
> The cable is a rj45 to db25. It works. I am not sure about what is what on
> the rj45 side. This setup worked when I just hooked them up to the ports
> but when I tried to make them so I could telnet to them, that is when it
> quit working.
>
> The modem control off allowed me to connect to the port but can't get the
> device to respond. Looks like a tinkering with it job.
make sure its 2-3, 3-2, 4-5, 5-4, 8-20, 20-8 and 7-7
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Gene Imes http://www.ozob.net
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
9919 S. Gessner #201
Houston, Texas 77071 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~