Shiva dialler and PM3 with IPX

Yehavi Bourvine +972-2-6585684 (YEHAVI@vms.huji.ac.il)
Wed, 21 May 97 18:00 +0300

Hello,
I am trying to dial (via a modem) to a PM3 running 3.5.1b8 with Shiva dialer
version 4.1; with TCP/IP it works ok.
When I enable IPX on the Shiva I get an error messages "Unable to obtain IPX
address from remote server". The PM3 gets the IPX address assigned thru Radius,
and I see it in the Radius logfiles. The ether0 has IPX enabled (with SHOW SAP
I see our servers there) and the serial line has also IPX address (which is the
same as Radius assigns). Anything more I have to define?
Thanks! __Yehavi:

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Yehavi Bourvine (4X6DD), Phone: +972-2-6585684, H
Computation Center, H
The Hebrew University of Jerusalem, H
Givat-Ram, 91904 Jerusalem, Israel H H H
Fax: +972-2-6527349 HH H
H H
Email: YEHAVI@VMS.HUJI.AC.IL H
URL: http://www1.huji.ac.il/ H
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=