> Bitsurfr's at each end and we're running the serial ports at 230.4K to
> PortMaster serial ports at each end. Ping times run a minimum of just
OOh that is a bad way to do it because bitsmurfers convert to analog and
you loose about 20%.
> under 70 ms. Obviously, that would be the same regardless of the number
> of B channels we had up and running.
Thats terrible. My customers with 2b channels get 25ms ping times.
> The 70 ms time is obviously much more than you would normally get with
> FR but the throughput is the important part (to everyone except the
> real-time game players).
> I'd rather be running FR or a conventional dedicated line to that
> location but the numbers didn't work out in this case. Unfortunately the
> reliability of those ISDN lines is not as good as what we've seen
> elsewhere which may push us to finally put in a "real" circuit.
I bet you can increase your thruput if you get some better ta's or get
some isdn routers like the or-u
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
9919 S. Gessner #201
Houston, Texas 77071 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~