Try
"set isdn-numberauto off"
"set isdn-numberplan 0"
"set isdn-numbertype 0"
If you don't have ComOS 3.8.2, you might not be able to change things.
You need ComOS 3.8.2 to track down this problem and solve it.
If you feel you need to send another ISDN debug for this problem.
"ver"
"sh glob"
"sh line0"
"set debug isdn-d d0"
"set debug isdn d0"
"set debug isdn-max off"
"set debug clock on"
"set console"
If what I suggest fails, send me the debug trace from the above commands.
I will then check them. If I think something is still wrong, I will forward
it to support.
D1:send COMMAND SAPI=00, TEI=00, Info: N(S)=16, N(R)=6A, Poll=0
Q.931 CRV=(From Origin)004A Message=5-SETUP
04-BEARER CAPABILITY Bytes=90 90 A2
- code=0,mode=Circuit,info-rate=64 kbit/s
- 0x10:3.1 Khz audio
- Layer 1 indent=1, G.711 [10] u-law (USA)
18-CHANNEL IDENIFICATION Bytes=A9 83 91
- a8=1,iip=0,it=1,pe=1,dci=0,ics=1
- b8=1,cs=0,nm=0,ctme=3
- c8=1,cn=17
- Must have PRI B-Channel 17
70-CALLED PARTY NUMBER 8779194
- Type=4-Subscriber number
- Plan=1-ISDN/telephony numbering plan
D1:recv RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 2E
D1:recv COMMAND SAPI=00, TEI=00, Info: N(S)=6A, N(R)=17, Poll=0
Q.931 CRV=(To Origin)004A Message=2-CALL PROCEEDING
18-CHANNEL IDENIFICATION Bytes=A9 83 91
- a8=1,iip=0,it=1,pe=1,dci=0,ics=1
- b8=1,cs=0,nm=0,ctme=3
- c8=1,cn=17
- Must have PRI B-Channel 17
D1:send RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - D6
D1:recv COMMAND SAPI=00, TEI=00, Info: N(S)=6B, N(R)=17, Poll=0
Q.931 CRV=(To Origin)004A Message=3-PROGRESS
08-CAUSE 9F-31:Normal, unspecified
1E-PROGRESS INDICATOR Code=0,Location=4-Public network serving the remote
user
- 8-In-band infomation availiable
D1:send RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - D8
D1:send COMMAND SAPI=00, TEI=00, Info: N(S)=17, N(R)=6C, Poll=0
Q.931 CRV=(From Origin)004A Message=7D-STATUS
08-CAUSE E4-100:Invalid information element contents
14-CALL STATE code=0
- 3-Outgoing call proceeding
D1:recv RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 30
D1:send COMMAND SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - D9
D1:recv RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 31
D0:send COMMAND SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 6D
D0:recv RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 3B
D0:send COMMAND SAPI=00, TEI=00, Info: N(S)=1D, N(R)=36, Poll=0
Q.931 CRV=(To Origin)033D Message=45-DISCONNECT
08-CAUSE 90-16:Normal call clearing
D0:recv RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 3C
D0:recv COMMAND SAPI=00, TEI=00, Info: N(S)=36, N(R)=1E, Poll=0
Q.931 CRV=(From Origin)033D Message=4D-RELEASE
D0:send RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 6E
D0:send COMMAND SAPI=00, TEI=00, Info: N(S)=1E, N(R)=37, Poll=0
Q.931 CRV=(To Origin)033D Message=5A-RELEASE COMPLETE
D0:recv RESPONSE SAPI=00, TEI=00, Supervisory: SS=RR, N(R)=00, Poll=0
Not Q.931: Packet contents were: - 3E
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of A PM3 User
> Sent: Monday, March 01, 1999 04:46
> To: James Courtier-Dutton; A PM3 User; portmaster-users@livingston.com
> Subject: RE: (PM) PM3 Dial Back Troubles
>
>
> Hello James,
>
> As requested I set teh following debug options... however, the:
>
> set debug isdn-l1 d0
>
> option gave an error:
>
>
> The output I recevied from attempting to dial the specific location we're
> working with:
>
> Invalid parameter "isdn-l1 d0", please choose from:
You need to run ComOS 3.8.2 for this.
>
> message... hope I was doing this right.
>
> as for the output, it is as follows:
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>