G'Day Scott,
don't worry, the isdn-l1 debug is only on the PM2.
I've pulled out the relevant isdn-d debug and put it through my ISDN
debugger (at <http://203.15.95.24:81/pm/isdnd.html>). It looks like there
is something weird going on. There is never any Release message, it seems
to just time out (although the isdn-max doesn't show any timeouts). The PM3
also does not like the Progress Indicator Element returned from the
network. This could also have a lot to do with it.
My recommendations would be:
1. Please let me know was this debug trace done with an ISDN call or analog
call ? Is the number called ISDN or analog ?
2. Check with your telco that your PRI's have dial out enabled.
3. Check your switch type with the telco, ensure it hasn't changed on the PM=
=2E
PortMaster ISDN D channel decoder =A9 Matthew Walker 1998-9
D1: send 00 01 2c d4 08 02 00 4a 05 04 03 90 90 a2 18 03 a9 83 91 70 08 c1
38 37 37 39 31 39 34
Layer 2: Command 29 bytes
SAPI: 0, Call control Signalling (Layer 3)
TEI: 0, Fixed
Information Frame
Next Send N(S): 22
Next Receive N(R): 106
Layer 3: Q.931/I.451 user-network call control message
Call Reference Length: 2 bytes
Call Reference Flag: 0, From call originator
Call Reference Number: 9472
SETUP Message
Bearer Capability Information Element
Channel Identification Information Element
Interface Identifier Present: Interface Implicitly identifed
(same interface as this D channel)
Interface Type: Primary Rate
Preferred/Exclusive: Exclusive; only the indicated channel is
acceptable
D Channel Indicator: The channel identified is not the D channel
Information channel selection: No channel
Coding Standard: CCITT Standard
Number/Map: Channel is indicated by the channel numbers below
Shift Information Element
Called Party Number Information Element
Type of number: Local (directory) number
Numbering plan identification: ISDN numbering plan
Called Number: 8779194
D1: recv 02 01 d4 2e 08 02 80 4a 02 18 03 a9 83 91
Layer 2: Command 14 bytes
SAPI: 0, Call control Signalling (Layer 3)
TEI: 0, Fixed
Information Frame
Next Send N(S): 106
Next Receive N(R): 23
Layer 3: Q.931/I.451 user-network call control message
Call Reference Length: 2 bytes
Call Reference Flag: 1, To call originator
Call Reference Number: 9472
CALL PROCeeding Message
Channel Identification Information Element
Interface Identifier Present: Interface Implicitly identifed
(same interface as this D channel)
Interface Type: Primary Rate
Preferred/Exclusive: Exclusive; only the indicated channel is
acceptable
D Channel Indicator: The channel identified is not the D channel
Information channel selection: No channel
Coding Standard: CCITT Standard
Number/Map: Channel is indicated by the channel numbers below
Shift Information Element
D1: recv 02 01 d6 2e 08 02 80 4a 03 08 02 82 9f 1e 02 84 88
Layer 2: Command 17 bytes
SAPI: 0, Call control Signalling (Layer 3)
TEI: 0, Fixed
Information Frame
Next Send N(S): 107
Next Receive N(R): 23
Layer 3: Q.931/I.451 user-network call control message
Call Reference Length: 2 bytes
Call Reference Flag: 1, To call originator
Call Reference Number: 9472
PROGRESS Message
Cause Information Element
Coding Standard: ITU-T Standard
Location: Local exchange
Cause Code: 31, Normal, unspecified
Progress Indicator Information Element
Coding Standard: ITU-T Standard
Location: Remote exchange
Progress Description: In-band information or an appropriate
pattern is now available
D1: send 00 01 2e d8 08 02 00 4a 7d 08 03 80 e4 1e 14 01 03
Layer 2: Command 17 bytes
SAPI: 0, Call control Signalling (Layer 3)
TEI: 0, Fixed
Information Frame
Next Send N(S): 23
Next Receive N(R): 108
Layer 3: Q.931/I.451 user-network call control message
Call Reference Length: 2 bytes
Call Reference Flag: 0, From call originator
Call Reference Number: 9472
STATUS Message
Cause Information Element
Coding Standard: ITU-T Standard
Location: Customer Equipment (CE)
Cause Code: 100, Invalid information element contents
Diagnostic: Progress Indicator Information Element
Call State Information Element
Regards
Matthew Walker
Matthew Walker <mailto:mwalker@lidcam.com.au> Lidcam Technology
Ph: +61 3 9865 9077 Level 5 499 St Kilda Rd
=46ax: +61 3 9866 1245 Melbourne VIC 3004
<http://www.lidcam.com.au/users/matthew/> AUSTRALIA
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>