Re: (PM) Strange Frame Realy Connectivity Problem
Douglas Michaud (admin6@teleport.com)
Mon, 01 Mar 1999 09:52:47 -0800
In message <36DAC4B2.4612D974@svwh.net>, Mike Sherman writes:
>
>The current status of the Frame port is thus:
>
>--------------------- Current Status - Port W1 -------------------------
> Status: ESTABLISHED
> Input: 5184090 Abort Errors: 5747
> Output: 12100374 CRC Errors: 4162
> Pending: 0 Overrun Errors: 0
> TX Errors: 2 Frame Errors: 0/3
> Modem Status: DCD+ CTS+
>
> Active Configuration Default Configuration
> -------------------- ---------------------
> Port Type: Netwrk Netwrk (Hardwired)
> Line Speed: Ext 1536K Ext Clock
> Modem Control: on on
> Local Address: 10.0.2.2 10.0.2.2
> Netmask: 255.255.255.0 255.255.255.0
> Interface: frmW1 (FRM,Quiet) (FRM,Quiet)
> Mtu: 1500 0
> Pkt Filters: In:consoles Out:
> Dial Group: 0
> Annex-D Poll: 10 (seconds)
> Old DLCI List:
!! ^^^^^^^^^^^ !!
problem -
do a :
set w1 dlci 16:xxx.xxx.xxx.xxx (where xxx is ip of the far end)
save all
reset w1
groovy . .
--
-------
Douglas Michaud, {dmichaud|admin6}@teleport.com, Network Engineering
PGP Id=FADF93C5, Fprint=B9 04 FD FA E7 4C 83 69 DD 45 E2 D2 17 D5 DD 2F
Teleport, Inc | 319 SW Washington #400, PDX OR | 503.223.0076
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>