We have a PM3 recently installed, running ComOs V.3.8. It has a 2 PRI line
attached (Euro ISDN). Its configured as usual. But it has a strange problem
now: PM3 hangs up irregularly. When it is hanged up no ring heared when
called and at the same time its ethernet port goes down. I cant telnet to
PM3. But on the console, you can run commands, and see the settings.
There is no CRC errors on lines by-the-way.
When it is rebooted, everyting goes fine. The problem disappear, but only
for a few hours. Then it is locked again.
Do you have any idea ? It seems like a hardware problem?
Sincerely yours.
-- Murat BALCI / TEKNOBIM Sair Esref Bul. Huzur Ishani. 27/2 Kat:2 Montro/IZMIR/TURKEY Tel:+90-232-482 3333 / Fax:+90-232-441 4140
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>