> We have a PM3 recently installed, running ComOs V.3.8. It has a 2 PRI line
> attached (Euro ISDN). Its configured as usual. But it has a strange problem
> now: PM3 hangs up irregularly. When it is hanged up no ring heared when
> called and at the same time its ethernet port goes down. I cant telnet to
> PM3. But on the console, you can run commands, and see the settings.
I've had similar problems.
> There is no CRC errors on lines by-the-way.
Same here.
> When it is rebooted, everyting goes fine. The problem disappear, but only
> for a few hours. Then it is locked again.
>
> Do you have any idea ? It seems like a hardware problem?
Try ComOS 3.8.2, it seems to work well for some people. If the problem
persists, contact your reseller.
-- Richard Morrell richard@ednet.co.uk System Administrator - edNET: Internet Access for Edinburgh - www.ednet.co.uk
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>