Re: (PM) syslog changes, require reboot?

Thomas Kinnen (tkinnen@livingston.com)
Wed, 03 Mar 1999 11:20:59 -0800

Mike Greene wrote:
>
> Setting up the termination cause logging on our PM3's but not seeing any
> syslog messages being logged. This is what I've done on our PM3's and our
> loghost

log host changes require a reboot. Optionally (though not supported)
you can do a 'reset nXXX' to reset the network handle of the syslog
service.

Changing the syslog logging options takes effect right away.

-- 
Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>