This needs to be addressed VERY quickly. PM3's with the new modem cards
are no longer usable for any remote site. This is a SERIOUS flaw. One
which has moved PM3's off my list of acceptable remote location equipment.
John
-------------------------------------------------------------------------
NetRom Internet Services 973-208-1339 voice
john@netrom.com 973-208-0942 fax
http://www.netrom.com
-------------------------------------------------------------------------
On Tue, 9 Mar 1999, Thomas C. Kinnen wrote:
> Jake Messinger wrote:
> >
> > I am getting this error on a new pm 3:
> >
> > UNIT_STATUS 0x4.
> >
> > This isnt by any chance caused with the NEW modem cards and com os 3.8 is
> > it?
>
> Pull the modem cards and boot up with no modems installed. If it comes up
> then upgrade to ComOS 3.8.2 and then install the modems and reboot.
>
> --
> Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>