We have a ticket in with Lucent about it.
Jon Hulett
Technical Coordinator
I-2000 Inc.
On Thu, 11 Mar 1999, Larry D Snyder, CEN, RN wrote:
> What is the status of this? I have a PL75 running 7.0.0 connecting to a PM3
> with the latest code.. BACP is yes, stac-9 enabled. I still exhibit the
> problem described..
>
>
> On Fri, Nov 06, 1998 at 09:21:48AM -0600, Tim Winders wrote:
> > My original message said that I was having problems with an Ascend Pipline
> > 85 connecting to a PM3. The pipeline was running 6.1.7 software and the
> > PM3 ComOS 3.8. Every once in a while the pipe would stop transmitting
> > traffic over the WAN (BRI) port. I would have to hang up and dial again
> > and then it would start working.
>
> I missed your original message, so this may be too late to help, but
> there is a DEFINATE compatability problem between an Ascend running STAC
> (Stac-9 in their profile) and the PM3. I've had to disable STAC compression
> on all Ascend units that call into the PM3, because it will do exactly
> as you describe - the connection will "hang" every so often. It seems
> to be data-dependant; there is some corrolation to certain web pages or
> FTP sites causing it to happen. After a few minutes, it will usually
> come back and start passing data again. Disconnecting manually from either
> end will allow it to reconnect and start working immediately. A "set
> debug 0x51" on the PM3 shows a series of CCP RESET and CCP RESET ACK
> messages while the connection is "hung".
>
>
> I have an open ticket on this; I guess Simon is working on it, but I
> haven't heard anything for a couple weeks.
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>