(PM) Re: PMVision COnnections

Thomas C. Kinnen (tkinnen@livingston.com)
Sat, 13 Mar 1999 20:33:26 -0800

Larry wrote:
>
> We just started having a problem with one of our PM3's
> we can't get in to it with PM Vision 1.3b6 there is no problem going to
> other PM3's on the system we get connection refused we made no changes to
> this
> unit the strange thing is we can telnet to it just fine
> any idea

Few things to try. Check the max PMConcsole sessions:

Command> set max pmcon 10
Maximum PMconsole sessions changed from 4 to 10

Also look for any network connections on 1643 and and reset that network
handle

Command> show netcon
Hnd Recv-Q Send-Q Local Address Foreign Address (state)
429 0 0 or-ap.sobhrach..1643 0.0.0.0.0 LISTEN
424 0 0 or-ap.sobhrach..23 0.0.0.0.0 LISTEN
363 0 2 or-ap.sobhrach..23 rei.sobhrach.co.1509 ESTABLISHED
257 0 0 or-ap.sobhrach..1643 rei.sobhrach.co.1511 ESTABLISHED
81 0 0 or-ap.sobhrach..1033 sasami.sobhrach.53 UDP
79 0 0 or-ap.sobhrach..1029 gendou.sobhrach.1646 UDP
11 0 0 or-ap.sobhrach..1027 0.0.0.0.0 UDP
9 0 0 or-ap.sobhrach..67 0.0.0.0.0 UDP
6 0 0 or-ap.sobhrach..161 vernor.lcp.livi.1367 UDP
4 0 0 or-ap.sobhrach..1023 rei.sobhrach.co.514 UDP
1 0 0 or-ap.sobhrach..520 158.222.9.95.520 UDP
Command> reset n257
Network connection 257 successfully reset.
Command>

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>