1)Set max pmconsole to 10 connections
ex:
pm3> set max pmconsole 10
Maximum PMconsole sessions changed from 1 to 10
2)Get the current netconnection handle(for the 1643 connections)
ex:
pm3> show netc
Hnd Recv-Q Send-Q Local Address Foreign Address (state)
505 0 0 pm3.livingst.1643 192.168.1.1.4890 ESTABLISHED
....
3)Reset the established netconnections to reset the PortMaster's 1643
internal connection counters.
ex:
pm3> reset n505
Network connection 505 successfully reset.
After you reset all of the established connections the counters will be
reset to the new value that you have specified in step 1 without a reboot.
Let me know if you need me to elaborate on any of the above steps.
hope this helps,
chadb
-----Original Message-----
From: owner-portmaster-users [mailto:owner-portmaster-users]On Behalf Of
Shawn Ring
Sent: Monday, March 15, 1999 6:49 PM
To: portmaster-users@livingston.com
Subject: (PM) PMVision v1.3b6 "Connection Refused"
I thought I saw this problem brought up just a day ago, but I didn't see
an answer. I have PM3s running 3.8.2. I have PMVision v1.3b6. When I
try to login in to a couple of my PM3s through PMVision I receive a
connection refused. I increased the max PMConsole by 1 (through telnet),
that did not change it. I don't want to reboot the box, to many
users....how do I get the connection to stop being refused?
Thank you ahead of time for your reply.
Shawn Ring
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>