> When i logged in to PM3 using PM Console software, each port is showned
> on "Network type" as Dial in & Out ...
>
> Any idea ?
The ports are set to allow incoming and outgoing PPP and SLIP connections.
I would suggest taking a look over the following URLs as they should answer
many of your questions.
http://www.livingston.com/tech/technotes/start/GettingStartedWebTOC.html
http://www.livingston.com/marketing/products/quick_start_pm3.html
http://www.livingston.com/tech/docs/manuals.html
http://www.livingston.com/tech/technotes/200/210001.html
http://www.livingston.com/tech/technotes/100/140007.html
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>