(PM) Port Config. Login and Network (fwd)

MegaZone (megazone@megazone.org)
Wed, 17 Mar 1999 01:00:47 -0800 (PST)

Once upon a time Chuck Shimada shaped the electrons to say...
>PPP and Telnet sessions. I have looked in the manual and while not
>stating that I can do this, it has not stated I can not either.

'set s29 login network dialin'

>So, I have tried "set s29 login", using a user which is set up

That's inbound shell only - no PPP.

>If I "set s29 network dialin", the PPP id works but the Telnet

That's inbound SLIP/PPP only - no shell.

You need to set BOTH.

>How are the ISP with one set of dialup numbers allowing both
>to PPP and Telnet(Shell) access to occure?

Set the PM to do it, as I showed, and have the right RADIUS entries.

-MZ

-- 
-=*X I'm going down...  under that is! <URL:http://www.aussie-isp.net/> X*=-
<URL:mailto:megazone@megazone.org> Gweep, Discordian, Author, Engineer, me..
Join ISP/C Internet Service Providers' Consortium <URL:http://www.ispc.org/>
"A little nonsense now and then, is relished by the wisest men" 781-788-0130
<URL:http://www.megazone.org/>  <URL:http://www.gweep.net/>  Hail Discordia!
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>