Re: (PM) E1 PRI "NO-SERVICE"

Stephen Zedalis (tintype@exis.net)
Wed, 17 Mar 1999 14:38:11 -0500 (EST)

It means most likely that you have a good T-1 carrier but no properly
configured D channel. What does a "sh isdn" and "show line0" give you?
Also check your "sh glo" and check your switch type.

Cheers

Stephen

On Wed, 17 Mar 1999, Jon Ribbens wrote:

>What does the following mean from a PM3 with an E1 PRI?
>The documentation claims it means our BRI SPID is misconfigured.
>The PM3 cannot take a BRI ;-).
>
>--------------------- Current Status - ISDN Port S0 ------------------------
> Status: NO-SERVICE
> Input: 0 Abort Errors: 0
> Output: 0 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD- CTS+ TELCO+ Disconnect:

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>