(PM) Any command differences between PM3 and PM2

MED, Wipro Systems, Inc ("Nair,)
Wed, 24 Mar 1999 13:32:47 -0600

Hi

We have a setup with PM2 for dial in/out access.

We are looking to upgrade the system with high capacity/rely machine. We
are looking pm3 for the same

We also have a graphic user interface tool (developed by us) for
connecting
(dialout) to remote machine on ppp.

I would like to know the command differences on PM3 compare to pm2.

This PM3 migration should be transperent to this GUI tool/users.

If any body have a list of the same or any related info, pls provide me
to
modify the code of the tool which should work over PM3 also...

TIA

With Warm Regards
Shibu R
_________________________________________________
Mailto : Shibu.Nair@med.ge.com
shibur@wipsys.soft.net
Tel : (414) 524 5261
Fax : (414) 896 2790

GE Medical Systems
Global Service Engineering
Pewaukee
Waukesha, WI 53072

----------
From: Thomas C Kinnen[SMTP:tkinnen@livingston.com]
Reply To: Thomas C Kinnen
Sent: Saturday, March 20, 1999 11:49 AM
To: Portmaster Users
Subject: Re: (PM) Connecting to ISDN router

Stavros Patiniotis wrote:

> pm3-1> sh loc Sav
> Location: Sav Type: Manual
> Destination: 10.12.12.253 Netmask: 0.0.0.0

Try setting the correct netmask. If this is a single IP address
try:
255.255.255.255.

> Local IP: 10.12.12.252

IS this the same as your reported or local IP address?

> Protocol: PPP Options: Quiet, CHAP

Are you sure the remote location supports CHAP? You may also
want to set
PAP on.

> Group: 0 Max Ports: 1
> Idle Timeout: 0 minutes High Mark: 0 bytes
> Mtu: 1500 Async Map: 00000000
> Username: sav Password: HIDDEN
> Telephone: 84075999
>

Also you may want to get one of the JAVA PPP debug tools and see
where the
connection is failing after the PPP starts.

--
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my
employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive:
<URL:http://www.livingston.com/Tech/archive/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>