Re: (PM) Suggestions for multilink router

Thomas Kinnen (tkinnen@livingston.com)
Wed, 24 Mar 1999 13:46:19 -0800

Craig Baird wrote:
>
> So, I'm assuming from this that if I used a PM2 or 2e, I could do

Not Multi-Link but you will be using Load Balancing. Multi-Link is only on
ISDN on the PM2.

> Multilink PPP to our PM3 with more than two modems, right? Is there a

Using Load balancing. Yes...

> limit as to how many modems you could use on one Multilink connection?

As many ports as are on the PM. I've used up to 4 in the past.

> I'm guessing this would work from a PM25 as well, right?

Yes

-- 
Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>