(PM) Re: FW: OR-U Quick Setup Guide (fwd)

Mia's Virtual Post Office (list@mia.net)
Wed, 24 Mar 99 19:07:41 -0600

Subject: OR-U Quick Setup Guide

Here's how to configure your OR-U to dial out on demand to a central
>> site.
>> > >>You can abbreviate the commands to uniqueness.
>> > >>Fill in the blanks with your information.
>> > >>
>> > >>set gateway ____________ (IP address of the router at central site)
>> > >>set isdn-switch ni-1 (or dms-100 or 5ess or 5ess-ptp)
>> > >>set ether0 address _____________ (your IP address)
>> > >>set ether0 netmask 255.255.255.0 (or whatever you're using)
>> > >>
>> > >>set s1 spid ________________
>> > >>set s1 directory ___________
>> > >>set s1 group 2
>> > >>set s2 spid ________________
>> > >>set s2 directory ___________
>> > >>set s2 group 2
>> > >>
>> > >>add location hq
>> > >>set location hq on_demand
>> > >>set location hq destination _________ (same IP address as used for
>> gateway)
>> > >>set location hq netmask 255.255.255.0
>> > >>set location hq idletime 2 (2 to 240 minutes, do NOT
>> use 1)
>> > >>set location hq group 2
>> > >>set location hq username ________ (your username on hq)
>> > >>set location hq password ________ (your password on hq)
>> > >>set location hq telephone _______ (ISDN phone# of hq)&(second phone #)
>> > >>set location hq maxports 2
>> > >>
>> > >>save all
>> > >>
>> > >>
>> > >>On hq you'll add a netuser to the User Table or RADIUS using the
>> > >>above usename and password, protocol PPP, header compression on,
>> > >>address either negotiated or set the same as above.
>> > >>
>> > >>

Ok, I have followed the above guide to the letter. I have a question
about the Isdn-switch type. The previous Cisco1600 that did not work was
set for "basic-ni" However the OR-U does not recognize this as a switch
type. So I have set it to Isdn-switch ni-1 is this the same?

I am also unsure of the set ether0 netmask. I am assigning one static IP
to this user, so I assume it is 255.255.255.255, just like the dial ups?

here is what I have in the RADIUS Server for the dialin ISDN user.

glass Password = "******"
User-Service-Type = 2,
Framed-Protocol = PPP,
Framed-Address = 156.46.180.2,
Framed-IP-Netmask = 255.255.255.255

Does this look ok?

jer

"On a day no different than the one now dawning, Leonardo drew the first
strokes of the Mona Lisa, Shakespeare wrote the first words of Hamlet, and
Beethoven began work on his Ninth Symphony." And Windows98 Crashed!

COMPAQ Class Action Law Suit: http://members.aol.com/CClass450/index.htm

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>