For us the disconnects are also the main problem with the PM3.
Disconnects happen with all type of modems and this now
since end December 98 when 3.8.2 was released. We got
NO FIX from Lucent up to now.
We need to see an improvement in modem code very soon!
Does anybody know if V.110 will be supported on the existing 56k
modem cards soon?
Christian
At 06:16 AM 3/25/99 , you wrote:
>Since Sunday the disconnects have been going through the roof. I've checked
>checked with the telco and everything is fine I swapped out one of the PM3's
>with an AS5200 and the problem went away. The PM3's have been working fine
>(except for a marginally higher disconnect rate than the AS5200s) until now.
>I'm running 3.8.2 on the PM3's does anyone have any thoughts on what could
>be happening or how I could fix it I have rebooted the PM3's but it did not
>help. This is happening with a wide variety of modems as well, not just one
>brand. I have noticed that my upstream internet bandwidth supplier has been
>having difficulty and is dropping packets is their any reason why the PM3's
>would be more affected than the AS5200s.
>
>M10 S3 ACTIVE 42000 V42BIS LAPM 72 1 CIRCUIT
>DISCONNECT
>M11 S17 ACTIVE 42000 V42BIS LAPM 58 4 LAPM DISCONNECT
>This is what I see on a sho modem there is no normal disconnects on any of
>the PM3's now.
>Any thoughts.
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>