Do you have an open case with Cisco? Perhaps we should give Cisco both case
numbers so that they can see that this is not just a single user problem.
Jim
----- Original Message -----
From: N.B. Del More <nbd@inr.net>
To: <portmaster-users@livingston.com>
Sent: Monday, March 22, 1999 6:20 PM
Subject: (PM) ISDN DOSBR (PM2Ei & Cisco 800)
> I'm trying to get a new dedicated ISDN customer set up and running and
we're
> running into a brick wall here with DOSBR.
>
> We're using a PM2Ei with 10 BRI ports, incoming ISDN line is configured
for
> Data/Voice on both channels, and in fact was used successfully by a former
> member of the staff who was using an OfficeRouter.
>
> Our customer purchased a new Cisco 800 ISDN router. Both channels connect
> fine in data mode, and he can get it to connect with one channel in Voice
> mode, but he cannot get the danged thing connect both channels at one in
> Voice mode. And I don't have any experience with the Cisco product.
>
> Any one have any clues or suggestions?
>
> Thanks
> Noel
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>