This doesn't even mention V.90 and still talks about x2 and v.FC. I
suspect it's rather dated. Still some good information though, but I'd
recommend http://www.808hi.com/56k/ instead.
> Incidentaly I am tearing my hair out about 1 or two customers who have
> disconnect problems. I have thought about extending DTR drops - any
> suggestions as to a value?
Have you tried limiting the maximum connect rate first?
> Any experiences on mulitlinking zytel isdn most welcome. One of our
> customers has one which worked perfectly against a 3com chasis but
> stubbornly refuses to run both channels against our new PM3.
This is identical to the Netgear RT328. I've used both and works fine
on our PM3's with PRI's. I believe there is a bug with the RT328 in CT1
installations. In that case, you might have to put in "ppp lcp bacp off"
in the command line.
Tim
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>