Once upon a time Peter Salvage shaped the electrons to say...
>1. What the "default host" is in the PM2e30 config?
The default host is used for shell users (rlogin, telnet, etc). If they are
not assigned a specific host to connect to in their user profile then the
PM will first look at the port for a host. If there is none configured there
then it will fall back to the global default. It has no effect on framed
users.
>2. Previously I was running RAS on NT to authenticate users. Using RADIUS, does
>this entail specifying each of my users in the user file?
No, you should investigate 'DEFAULT' users and 'Auth-Type = System'. And if
you have more RADIUS issues I'd use portmaster-radius@livingston.com
-MZ
-- -=*X I'm going down... under that is! <URL:http://www.aussie-isp.net/> X*=- <URL:mailto:megazone@megazone.org> Gweep, Discordian, Author, Engineer, me.. Join ISP/C Internet Service Providers' Consortium <URL:http://www.ispc.org/> "A little nonsense now and then, is relished by the wisest men" 781-788-0130 <URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail Discordia! - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>