Mike Roberts
===========================================
*DataWest Internet - Nationwide Access
*Colorado Springs - http://www.datawest.net
*(719) 635-9999 - (877) DATAWEST
*Virtual Webhosting - FrontPage - Ecommerce
-----Original Message-----
From: owner-portmaster-users@livingston.com
[mailto:owner-portmaster-users@livingston.com]On Behalf Of Thomas Kinnen
Sent: Monday, March 29, 1999 10:53
To: portmaster-users@livingston.com
Subject: Re: set modem off effect on a PRI (was Re: (PM) Bad modem)
Cassandra Perkins wrote:
> Is there any way to force a busy on the channels on a partially loaded PM3
> so the next call will hunt to the next PM3? I know you could have the
telco
> busy out channels on there end, but it would be better to control this
using
> the portmaster instead.
Set the channel for dial out only. This will work on most switches.
-- Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer"- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>